MHT258a (Engl.)8-9
(v) In the monitor mode [On007] on the touch panel, make sure the output pulse count of the host controller and integrated pulse count of the
amplifier coincide with each other.
The example of display indicates the integrated input pulse count is 250000. Forward pulse input counts it up or reverse pulse input counts it
down.
Two 90° phase-different signals indicate 4 times the input pulse count (quadrupling).
Pressing the MODE key holding
down the SHIFT selects the high
order 4-digit or low order 4-digit.
ENT (1 [sec] min.)
ESC
To Next Page
Loading...