Billing Information
151
Machine Status
4
îš„ Total Impressions
Displays the total number of Color Impressions and Black Impressions.
z
When print data resulting from color conversion using an ICC profile, for example, on the application is
printed at Auto (Color/B/W), even documents that appear in black-and-white on the monitor are printed in
color. In this case, Color Impressions is used for counting the number of prints.
The table below shows which billing meter is counted depending on the combination of
area of paper and the output color.
*1 : 279 mm or more in the primary scanning direction and 400 mm or more in the secondary scanning direction.
*2 : 297 x 420 mm represents the area of a A3 paper sheet.
User Account Billing Information
You can check the number of pages printed by user.
When the Auditron mode is enabled, you can check the billing meters for the currently
authenticated user ID.
z
[User Account Billing Information] is displayed when the [Accounting Type] is set to [Local Accounting].
z
For more information on the Auditron mode, refer to "Accounting" (P.163).
1
Press the <Log In/Out> button.
To check the billing meter of a currently authenticated user ID
1) Enter the user ID with the numeric keypad or the keyboard displayed on the screen, and
select [Enter].
Area of Paper Output Color Meter for Counting Number of
Counts
Smaller than 279 x 400 mm
(0.1116 m
2
)
Black & White Black Impressions 1
Full Color Color Impressions 1
279 x 400 mm (0.1116m
2
)or
larger
*1
and smaller than297 x
420 mm
*2
x 1.5 (0.18700m
2
)
Black & White Black Impressions 1
Full Color Color Impressions 1
Color Large Impressions 1
297 x 420 mm
*2
x 1.5 (0.18711
m
2
) or larger and 297 x 420
mm
*2
x 2.0 (0.249480 m
2
) or
smaller
Black & White Black Impressions 2
Full Color Color Impressions 2
Larger than 297 x 420 mm
*2
x
2.0 (0.249480 m
2
)
Black & White Black Impressions 3
Full Color Color Impressions 3