Scanner Environment Settings
402
Scanner Environment Settings
9
Configuration of Scan to PC
This section describes how to configure the machine to use the Scan to PC service.
Step 1 Preparations
The following items are required to use the Scan to PC feature.
Using FTP
To transfer data via FTP, one of the following FTP servers and an account to the FTP server
(login name and password) are required.
z
Microsoft Windows Server 2008, Microsoft Windows Server 2008 R2, Microsoft Windows
Server 2012, Microsoft Windows Server 2012 R2, Microsoft Windows Vista, Microsoft
Windows 7, Microsoft Windows 8, Microsoft Windows 8.1, or Microsoft Windows 10
FTP service of Microsoft Internet Information Server 7.0 or later
z
Mac OS X
FTP service of Mac OS X 10.6, Mac OS X 10.7 Lion, OS X 10.8 Mountain Lion, OS X 10.9
Mavericks, OS X 10.10 Yosemite, and OS X 10.11 El Capitan
z
For information on how to configure the FTP service, refer to the manual provided with the software. For information on how to
configure the settings on Mac OS X 10.7 Lion, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, OS X 10.10 Yosemite, and OS X 10.11
El Capitan consult the official website of Apple Inc.
Using SMB
To transfer data via SMB, your computer must run on one of the following operating
systems that includes folder sharing.
For Mac OS X, a shared user account is required on the Mac OS X.
z
Microsoft Windows Server 2008
z
Microsoft Windows Server 2008 R2
z
Microsoft Windows Server 2012
z
Microsoft Windows Server 2012 R2
z
Microsoft Windows Vista
z
Microsoft Windows 7
z
Microsoft Windows 8
z
Microsoft Windows 8.1
z
Microsoft Windows 10
z
Mac OS X 10.6 Snow Leopard
z
Mac OS X 10.7 Lion
z
OS X 10.8 Mountain Lion
z
OS X 10.9 Mavericks
z
OS X 10.11 El Capitan
To Next Page
Loading...
Need help?
General
