Fold Position Adjustment
767
Appendix
16
9
Select the tray in which you loaded paper, and press the <Start> button. The sample is
printed.
10
Select [Close].
11
Confirm the result of sample printout.
12
Adjust the alignment again if necessary. (Steps 5 to 11)
13
Select [Save].
14
Select [Close] until the Services Home screen is displayed.
z
When you configure settings under [System Settings] or [Setup] and then press the <Services Home> button,
the screen directly goes back to the Services Home screen.
Booklet Position Adjustment
Adjust the booklet position.
1
Select [Booklet], and then select [Change Settings].
2
Select [Sample Printout].
To Next Page
Loading...
Need help?
General
