Appendix
864
Appendix
16
Notes and Restrictions on the Authentication and Accounting Features
îš„ Login to Remote Accounts (ApeosPort Series Models Only)
z
When the authentication server performs print or direct fax using Kerberos Server, trying
to authenticate with the user information authenticated by the machine will be failed.
z
When you change Login Type to or from [Login to Remote Accounts], user information,
private folders, and Job Flow sheets registered on the machine will be deleted.
z
ApeosWare Management Suite does not support the feature to automatically obtain the
certificate of the authenticated users from a remote server.
îš„ Remote Authentication and ApeosWare Management Suite (ApeosPort Series Models
Only)
z
The remote authentication server that ApeosWare Management Suite (sold separately)
can use is Active Directory only.
z
Color Access is available but the limit for the maximum number of pages is not available.
îš„ Remote Authentication using the Smart Card
z
Remote Authentication can be performed in an environment where ApeosWare
Management Suite, Active Directory, or the combination of ApeosWare Management
Suite and Active Directory is used.
z
Change the default realm name only when you want to use a different realm name.
Notes and Restrictions for Using SMB
This section describes notes and restrictions to observe when using SMB.
îš„ Configuration on the Machine
z
IP addresses are managed for the entire system. Configure the settings only after
consulting your network administrator.
z
The setting of subnet mask and gateway addresses may be required depending on the
network environment. Consult your network administrator and configure the required
settings.
îš„ Configuration on the Computer
z
IP addresses are managed for the entire system. Configure the settings only after
consulting your network administrator.
z
When setting the network such as IP addresses with a host used under the Network
Information Service (NIS), consult your NIS administrator.
îš„ SMB Authentication
When an IP address or a host name is used to designate the authentication server for SMB
authentication, even if the domain name is incorrect, the authentication succeeds if the
correct user name and passcode are entered.
Notes and Restrictions for Using TCP/IP
This section describes notes and restrictions to observe when using TCP/IP (LPD).
To Next Page
Loading...
Need help?
General
