Tools
182
Tools
5
îš„ Background Suppression (Black Copy)
Set the method of background suppression to be used when making monochrome copies.
Background suppression is the function to detect the density of colors and suppress the
scan of background colors when a document has background colors on colored paper.
Select [High Speed] to sample a section of the document and detect the background color.
Select [High Quality] to conduct a pre-scan, and sample the whole document to detect the
background color.
z
When you select [High Quality], and [Corner Shift] is selected in [Image Shift] with a ratio of 60% or less is
specified in [Reduce/Enlarge], a part of the image may not be printed or blank paper may be output.
îš„ Background Suppression (Scan Jobs)
Set the method of background suppression to be used for scan operations.
Set how the machine detects density and deletes the background color.
Select [High Speed] to sample a section of the document and detect the background color.
Select [High Quality] to conduct a pre-scan, and sample the whole document to detect the
background color.
îš„ Image Enhancement
Allows you to select whether to carry out image enhancement. If you select [On], the
machine gives the image a smoother appearance when printed.
This setting is applied for the copy and fax jobs.
Calibration
When color gradation of a printed image shifts, you can calibrate the color of the image to
maintain the image quality of the machine at a certain level.
z
For more information, refer to "Executing Calibration" (P.117).
z
If you cannot calibrate the machine to adjust for a shift in color gradation despite the periodic calibration,
contact our Customer Support Center.
îš„ Screen Type
Select from [Copy Job 1], [Copy Job 2], [Print Job 1], and [Print Job 2].
z
For more information about screen type, refer to "Executing Calibration" (P.117).
îš„ Paper Supply
Select a tray.
îš„ Target
Select from [Copy & Print Jobs], [Copy Jobs Only], [Print Jobs Only], and [None].
Adjust Color Registration
You can adjust color registration if colors are misaligned in outputs.
Selecting [Start] starts color registration.
z
Do not execute color registration continuously. Doing so may impair the performance of the machine.
To Next Page
Loading...
Need help?
General
