Using the Server Fax Service
444
Using the Server Fax Service
12
z
IP Address/Host Name and Port (If the port number is blank, the default port number
(FTP:21 or SMB:139) will be used.)
z
Share (SMB only)
z
Document Path
z
Login Name
z
Password
z
Retype Password
îš„When [SMTP] is selected
The SMTP server settings are the same as the E-mail settings.
z
For more information on the SMTP server settings, refer to "Step 2 Configuring E-mail Environment" (P.394).
The following settings are additionally required for the SMTP server.
z
Domain Name
z
E-mail Address Display Format
12
Click [Apply] to enable the settings.
z
For more information on how to print a settings list, refer to "Print Reports" (P.131).
To Next Page
Loading...
