Trouble during Faxing
523
Problem Solving
15
The image quality
is poor.
The resolution setting on the
sender's machine is too low.
Check with the sender.
z
Image quality may be affected by a problem
of the sender's machine, not just by a problem
of the machine.
The one-page
document is
received split into
multiple pages.
When scanned on the
sender's machine, the
document was enlarged for
some reason.
You can set the machine to process such a
document by using the Auto Reduce on
Receipt feature and a border limit value for
page splitting. According to the setting
combination specified, the received document
is printed as follows:
z
Refer to "Border Limit" (P.286), or "Auto Reduce On
Receipt" (P.286).
Although the
Folder Selector
feature is set,
however, the
received
document is
printed, and
cannot be stored
in the folder.
An unregistered folder is
specified on the Folder
Selector feature.
When using the Folder Selector feature,
specify a registered folder. If an unregistered
folder is selected, the received document
cannot be stored in the folder, and will be
automatically printed.
z
For information on how to register the folder, refer to
"Create Folder" (P.315). For information on the setting
of the Folder Selector, refer to "Fax Received Options"
(P.289).
Symptom Cause Remedy
Auto
Reduce on
Receipt ON
Auto
Reduce on
Receipt
OFF
Within
border limit
Automatic
ally
reduces
image size
and prints
it on one
page.
Trims the
portion
exceeding
standard
size and
then prints.
Exceeding
border limit
Splits data
at equal
ratio and
prints.
-
To Next Page
Loading...
Need help?
General
