Fuji Xerox ApeosPort-VI C4471 Administrator's Guide

Error Code
545
Problem Solving
15
"013-001" - "015-999"
012-290
012-291
012-292
012-295
012-296
012-297
012-298
[Cause] The finisher front cover is open.
[Remedy] Close the finisher front cover. If the error still is not resolved,
contact our Customer Support Center.
012-299
[Cause] Finisher malfunction
[Remedy] The error occurs when the first paper in a setting that comes to
a finisher tray is taken out before completely coming out to the
finisher tray. Make sure to take out the paper after it completely
comes out. Switch off the machine power, make sure that the
touch screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer Support
Center.
012-319
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
012-326
[Cause] Finisher malfunction
[Remedy] Make sure that a paper folding unit is plugged in. Switch off the
machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
012-334
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
012-350
012-351
[Cause] An error occurred in the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
Error Code
Cause and Remedy
013-210
013-211
013-212
013-213
013-220
[Cause] An error occurred in the Booklet Unit.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
013-291
013-292
[Cause] An error occurred in the finisher.
[Remedy] Turn the machine off and then on, and then execute the
operation again. If the error still is not resolved, contact our
Customer Support Center.
Error Code
Cause and Remedy

Fuji Xerox ApeosPort-VI C4471 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VI C4471
Category	All in One Printer
Language	English