Fuji Xerox ApeosPort-VI C4471 Administrator's Guide

Adjust Image Transfer
779
Appendix
16
Adjusting the transfer output value by scanning the sample printout
1 Press the <Log In/Out> button and enter the System Administration mode.
Reference
z
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.156).
2 Select [Tools] on the Services Home screen.
3 Select [System Settings] > [Common Service Settings] > [Maintenance].
4 Select [Adjust Image Transfer].
5 Select [Paper Type].
6 Select the paper type, and then select [Close].

Fuji Xerox ApeosPort-VI C4471 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VI C4471
Category	All in One Printer
Language	English