EasyManuals Logo

Fuji Xerox ApeosPort-VII C3321 User Manual

Fuji Xerox ApeosPort-VII C3321
516 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
Print Data Stored in the Device
111
1
Enter the authentication mode.
2
Tap [Jobs] on the Home screen.
3
Tap [Private Charge Print] at the bottom of the screen.
4
Select the job to be printed.
Note
To delete a file, select the file and tap [Delete].
If you select multiple files, they are printed in the selected order.
The image of a direct print job from the USB port is not previewed.
Reference
For information on the button operation, refer to "Common Operation Buttons" (P.75).
5
When printing, specify the number of print sets using the numeric keypad.
6
Tap [Print].
A screen for specifying how to handle the file after printing appears.
Note
If [Print Job Confirmation Screen] is set to [Off], the device automatically deletes the job after printing
without displaying the confirmation screen. For more information, refer to "[Print Job Confirmation Screen]"
(P.271).
Private Charge Print (All)
This feature allows you to print the Private Charge Print jobs at a time.
1
Enter the authentication mode.
2
Tap [Private Charge Print (All)] on the Home screen.
All jobs stored with Private Charge Print feature are printed.
After printing is done, the touch screen display goes back to the Home screen
automatically.
Note
The files printed correctly are deleted.
Up to 100 files can be printed at a time. Files are printed in order from the latest.
These jobs are recognized as Private Charge Print jobs on the [Jobs] screen or the Job History Report.
Restriction on Private Charge Print (All)
Jobs cannot be interrupted while using this feature.
You cannot use this feature when an equipment other than the IC Card Reader
(optional) is connected to the device.
When the Authentication feature is not used, you cannot use this feature.
If you operate nothing while the error screen appears, the Auto Clear is conducted and
the device exits the authentication mode. In this case, the error job may be printed when
the next user authenticates if the screen after the Auto Clear is not set to [Home] and
[Locked] is not set for [Device Access].

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-VII C3321 and is the answer not in the manual?

Fuji Xerox ApeosPort-VII C3321 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-VII C3321
CategoryPrinter
LanguageEnglish

Related product manuals