Fuji Xerox ApeosPort-VII C3321 User Manual

Features List
133
[Color Effects]
If you set this feature, the [Image Enhancement], [Lighten / Darken], [Sharpness],
[Saturation], [Color Shift], and [Color Balance] settings are automatically adjusted.
Note

If other image-quality settings are made after you set [Color Effects], the setting made in [Color Effects] will
be cleared.
[Color Balance]
This feature allows you to adjust the color balance of the four CMYK toner colors (cyan,
magenta, yellow and black). You can adjust the color balance per each density level:
Highlights, Midtones, and Shadows.
The Color Balance feature finely adjusts the density level for each toner color to fine-tune
the Color Balance, such as a reddish or bluish tint, while the Lighten / Darken feature
adjusts the overall density level of the four colors.
[Color Shift]
This feature allows you to adjust the tone of the colors to be reproduced in printouts and
copies.
Note

Ensure that [Output Color] is set to [Color] on the features list. [Color Shift] is not available when [Output
Color] is set to [Black & White].
[Book Copying]
This feature allows you to copy facing pages of a document on separate sheets of paper in
page order.
Note

A non-standard size document or undetectable-size document may not be separated into two accurately.

Use the document glass to load an original.
[2 Sided Book Copying]
This feature allows you to assign pages when making copies of facing pages in a bound
document such as a booklet so that pages face each other in the same way as the
document. You can also specify the starting and ending pages from the left and right of
facing pages, and erase shadows in the center of such documents by specifying the erase
width.
Note

A non-standard size document or undetectable-size document may not be separated into two accurately.

Use the document glass to load an original.

Fuji Xerox ApeosPort-VII C3321 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C3321
Category	Printer
Language	English