4 Print
118
AirPrint
AirPrint is a printing service provided by Apple Inc. By using AirPrint, you can request a
document print instruction to the device from macOS/OS X computers or iOS installed
devices such as iPad/iPhone, without installing any print drivers or special software. You can
also fax and scan documents using macOS/OS X computers.
For the latest information of AirPrint, refer to Apple Inc. official website.
Enabling iBeacon for Printers
You can instantly find nearby devices with iBeacon for Printers over Bluetooth; thus you can
select the desired device from the [Action] menu > [Print] > [Printer] on your iOS device
when you print or scan via AirPrint. PIN code entry is not required.
While Bonjour cannot search devices on the different subnet, iBeacon for Printers can find
them.
1
Start CentreWare Internet Services and log in to the System Administration mode.
2
Click [Network] > [Bluetooth].
The [Bluetooth Low Energy] screen appears.
3
Select the [Port (Bluetooth Low Energy)] check box.
4
Select the [iBeacon for Printers] check box.
5
Click [Save].
Rebooting the device is required to enable the settings. Reboot the device following the message on the
screen.
Enabling the AirPrint Setting
1
Start CentreWare Internet Services and log in to the System Administration mode.
2
Click [Network] on the left menu.
3
Click [AirPrint
TM
] under [Mobile Printing] to place a check mark for [On].
If the device is connected via USB, select the [USB Connection] check box for [AirPrint].
4
Configure the settings as required.
5
Click [Save].
Rebooting the device is required to enable the settings. Reboot the device following the message on the
screen.
To Next Page
Loading...
Need help?
General
