3 Basic Operations
66
Warmer Mode
Depending on the operating environment, temperature rise in the device may cause
condensation when the device exits the Sleep mode. You can use the Warmer mode to
prevent or reduce condensation.
We recommend that you enable this mode when the season changes.
During operation of the Warmer mode, the device does not enter the Sleep mode.
In some environment, the power consumption may increase.
Setting the Warmer Mode
1
Log in to the System Administration mode.
For more information, refer to "Login to Authentication Mode" (P.77).
2
Tap [Device] > [System Settings] > [System Clock / Timers] > [Warmer Mode].
3
Make settings as required.
For details, refer to "[Warmer Mode]" (P.250).
4
Tap [OK].
To Next Page
Loading...
Need help?
General
