2 Setup
52
Step 3 Testing the Internet Fax
Test the Internet fax transmission from the device.
1
Tap [Internet Fax] on the Home screen.
2
Specify an internet fax destination.
3
Tap [Send].
4
Check whether the computer received the email.
If the computer cannot receive the email, refer to "Problem Solving" (P.415).
Internet Fax/Internet Fax Direct Environment Settings
To use these features, the following settings are required.
For information on how to set a TCP/IP address, refer to "[Protocol Settings]" (P.305).
1
Log in to the System Administration mode.
For more information, refer to "Login to Authentication Mode" (P.77).
2
Tap [Device] on the Home screen.
Setting Internet Fax Internet fax Direct
TCP/IP address O O
Internet Fax Path O O
Email port O O
Subnet mask
Gateway
DNS server
The device's email address O O
Protocol to Receive Email O O
POP3 server X
POP3 login name/password X
SMTP server O O
SMTP AUTH login name/
password
O:Required
X : Not supported
: Set as required
To Next Page
Loading...
Need help?
General
