Interface Cables
39
3
Follow the on-screen instructions to complete the setup.
Installing with [Custom Installation]
Perform the following procedure in advance, and then start installing.
"Using the Ethernet Interface" (P.35)
"Using the USB Interface" (P.35)
"Connecting with Wireless LAN" (P.36)
1
Insert the "Software/Product Manual" disc into your computer.
If the "Software/Product Manual" disc does not start, perform the following.
1. Right-click the Start button, and then click [Run].
2. Enter "D:\Launcher.exe" ("D" is the drive letter of the optical drive), and then click [OK].
2
Click [Driver] or [Software].
When you select [Software], proceed to step 5.
3
Select [I accept the terms of the license agreement], and then click [Next].
4
Select the connection method you are using, and then click [Next].
5
Follow the on-screen instructions to complete the setup.
Installing Software for Mac
1
Insert the "Software/Product Manual" disc into your computer.
2
Open the following folders in the disc: [Software] > [MacPrinter] > [MacOSX] > [Common].
3
Double-click the pkg file in the folder.
4
Follow the on-screen instructions to complete the setup.
Installing Software for Linux
The latest print drivers for Linux computers can be downloaded from our official web site.
To Next Page
Loading...
Need help?
General
