13 Advanced Settings
252
[Alert Tone]
Set the volume to be sounded when a fault such as a paper jam occurs, and the job remains
in failure state.
[Out of Paper Warning Tone]
Set the volume to be sounded when a job is suspended because there is no paper in a tray.
[Low Toner Alert Tone]
Set the volume to be sounded when the toner cartridge needs replacing.
[Fault Clear Tone]
Set the volume to be sounded when an occurring error is resolved and the device is ready
for operation.
[Login Tone]
Set the volume to be sounded when the system administrator or a user logs in to the device.
[Power Off Tone]
Set the volume to be sounded when the power of the device is switched off.
[Mobile Device Connection Tone]
Set the volume to be sounded when the device detects a connection from any mobile
device.
[Line Monitor Tone]
Setting to play phone line sound on device speakers from when the dialing starts to
connection with recipient, when sending a fax. Convenient such when using fax information
service without a receive.
[Ringing Tone]
Set the volume to be sounded when the device receives a fax.
[Screen / Button Settings]
[Default Language], [Button Color Scheme], and [Suppress Notification Banner] are displayed when the latest
software is installed.
[Screen Default]
Set the screen displayed after powering on the device or canceling the Power Saver mode.
[Default Language]
Select the language displayed by default.
[Screen After Auto Clear]
Set the screen displayed after Auto Clear.
[Auto Display of Login Screen]
When the Authentication feature is enabled on the device, set whether or not to
automatically display the login screen after turning on the device or canceling the Power
Saver mode.
To Next Page
Loading...
Need help?
General
