10 Address Book
208
[Shared Name:]
Enter the shared name set for the SMB folder.
If the “/” mark is used at the top of a shared name, a job flow cannot read the shared name correctly. Do not
use the “/” mark at the top of a shared name.
[Save In:]
Enter the directory for storing files. When SMB is selected, use a UNC format.
Transferring via FTP/SFTP
To save files in the bbb directory under the aaa directory in the root directory: aaa/bbb
Transferring via SMB
To save files in the bbb directory under the aaa directory in a specified volume: aaa\bbb
[Port Number:]
Set the forwarding destination port number.
[User Name:]
Set the user name when a user name is required to be input by the forwarding destination
server.
For UPN Format:
User name@Domain name
Example: fuji@example.com (fuji: user name; example.com: domain name)
For NetBIOS Format:
Domain name\User name
Example: example\fuji (example: domain name; fuji: user name)
For Workgroups:
Local user name
Example: Fuji-Taro
[Password:]
Set a password when the forwarding destination server prompts a password entry.
[Transmission Header]
Set a destination name displayed on the transmission header.
[Starting Rate]
Set a communications mode.
[Resolution]
Set image quality for transmission.
To Next Page
Loading...
Need help?
General
