[Information & Reports]
233
[Broadcast Report]
You can check the result of a broadcast transmission. The recipients and transmission
result/status are recorded.
If you set to print this report automatically, it is printed each time a broadcast transmission
is completed.
For information on setting whether to print the report automatically, refer to "[Broadcast / Multi-Poll Report ]"
(P.256).
[Multi-Poll Report]
You can check the result of a multi-poll communication (polling from multiple recipients).
The remote terminal name and transmission result/status are recorded.
If you set to print this report automatically, it is printed each time a multi-poll transmission
is completed.
For information on setting whether to print the report automatically, refer to "[Broadcast / Multi-Poll Report ]"
(P.256).
[Job Flow Error Report]
This report notifies job flow errors. The date and time of the error occurred and the error
codes are printed.
You can set not to print out the Job Flow Error Report.
For information on setting whether to print the report automatically, refer to "[Job Flow Error Report ]" (P.256).
[Error History Report]
You can check the information on errors that occurred on the device.
The error history report shows the list of the latest 50 errors.
You can also access [Error History Report] under [Print Reports] > [Job Status / Activity Report].
If [Print Reports] under [Reports] is set to [Disabled], [Error History Report] does not appear on the screen. For
more information on reports, refer to "[Reports ]" (P.255).
To Next Page
Loading...
Need help?
General
