[System Settings]
261
When an error occurs during generating an image log, the device operates in accordance with the setting of
[Image Log Generation] > [Assurance Level] as follows.
[High]: Replaces the image to an error image (1x1 pixels) and indicates a system error. Turn off the device
and confirm that the control panel is lit off, and then turn on the device again.
[Low]: Replaces the image to an error image (1x1 pixels) and records the error information after finishing
the job.
Up to 2000 image logs can be stored in the device.
The text size of image logs differs depending on the setting of [Resolution] under [Image Log Generation].
Refer to the following table when you set the resolution.
[Image Log Control]
Set whether or not to use the Image Log Control feature.
[Image Log Target]
Set whether or not to create image logs per job type.
[Image Log Generation]
Set the image data to manage as an image log. One image log file (PDF format) is created
per one job.
[Assurance Level]
Set the assurance level, which affects whether to surely create image logs, from [Low] and
[High].
If you select [Low], image logs may not be created depending on the conditions.
[Resolution]
Set the resolution of images to be managed as the logs.
[Page Range]
Set the page range of images to be managed as the logs.
[Transfer Image Log]
Image logs created on the device can be transferred to a log management server for
storage and management.
[Log Transfer]
Set whether or not to transfer an image log to a log management server with the Log
Transfer feature.
Resolution Size for Color
Jobs
Size for B&W
Jobs
Remarks
200 dpi 6 pt 6 pt Adequate level for normal document.
100 dpi 10 pt 14 pt Large size characters are legible.
72 dpi 12 pt 18 pt Title size characters are legible.
50 dpi 16 pt 24 pt Characters are illegible. Suitable for
Preview.
25 dpi 24 pt 32 pt Characters are illegible. Suitable for
Thumbnail view.
To Next Page
Loading...
Need help?
General
