[App Settings]
283
[Fax Control]
[Re-enter Recipient]
Sets whether or not to require recipient input after specifying recipient, in order to avoid
mistaken sending of fax. When set to [Enter Twice], if setting is to use dial input to specify
recipient, a screen to enter recipient again appears. Sending is only allowed when this
matches the first specified recipient.
[Re-enter Broadcast Recipients]
This setting is required when you selected [Enter Twice] for [Re-enter Recipient]. Set
whether or not to allow the Broadcast Send.
[Re-enter Contacts]
When [Re-enter Recipient] is set to [Enter Twice], set whether or not to display confirmation
screen when specifying Address Book recipient.
[Re-enter Group Recipients]
When [Re-enter Recipient] is set to [Enter Twice], set whether or not to display allowance
and confirmation screen of group recipients.
[Display Broadcast Option]
Specify whether or not to show [Enable Broadcast] in the features list to explicitly express
broadcast directions.
[Chain Dial]
Set whether or not recipient number registered in Address Book can be specified as one
recipient in combination with the input number.
[Manual Redial List - Saved Entries]
Specify the number of redial destinations saved.
[Manual Redial List - Dial Mode]
Specify the destination type saved as a redial destination number.
When you deselect all the check boxes, the Redial feature becomes disabled.
[Trans Header / Cover Page]
Specify the recipient information to be printed on the Transmission Header Text and the
Cover Page.
The first 18 characters of the registered string will be printed.
When sending to a destination that [Transmission Header] is set in the Address Book, the character string set
for the destination is printed.
[Transmission Header Text - Polling]
Set whether or not to attach a transmission header to a polling file.
[Polled Files - Auto Delete]
Set whether or not to automatically delete a polling file after transmission.
To Next Page
Loading...
Need help?
General
