Fuji Xerox ApeosPort-VII C3321 User Manual

Emulation
497
If the origin position of the plotting position is Layout, the document is placed and drawn in
the center.
If the origin position is bottom left or center, the origin of the document and the paper are
aligned and drawn.
 If the Document Size is Auto and the Scaling Mode is ACA
The hard clip setting is inactive. The hard clip area is always the advanced hard clip area.
The scaling factor is determined according to the ACA and the paper size. The range for the
ACA for each paper size is as follows:
The maximum scaling factor is 210% of the advanced hard clip area for each paper size
and the minimum scaling factor is 22.5%.
Paper Size
A4 A5 B5
Document
Size
A0 25 100 100
A1 35 25 31
A2 50 35 43
A3 71 50 61
A4 100 71 87
A5 100 100 100
Unit: Percent (%)
Paper
Size
0 Degrees 90 Degrees
Min Value Max Value Min Value Max Value
P2x -
P1x
P2y -
P1y
P2x -
P1x
P2y -
P1y
P2x -
P1x
P2y -
P1y
P2x -
P1x
P2y -
P1y
A4 5485 3828 51200 35733 3828 5485 35733 51200
A5 3828 2648 35733 24720 2648 3828 44088 35733
B5 4723 3297 44088 30773 3297 4723 30773 44088
Unit: Plotter Unit

Fuji Xerox ApeosPort-VII C3321 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C3321
Category	Printer
Language	English