3 Basic Operations
96
Side-Opening Envelopes
Load envelopes with the flaps closed. Place the print side facing up, and the flaps come at
the right when you face towards the device.
Top-Opening Envelopes
Load envelopes with the side to be printed facing up. The orientation of the envelopes
varies depending on the envelope types (envelopes with or without adhesive glue).
When making prints, set the orientation of the envelope and printing direction from [Paper Settings Wizard]
of the print driver. For more information, refer to the help of the print driver.
When making copies, load an original in accordance with the orientation of the envelopes. For more
information, refer to "Document Glass" (P.100).
When using 162 x 229 mm size envelopes and make printing continuously, the envelope may be pushed out
from the exit tray. Take the already-printed envelope away before starting the next print job.
8 -10mm
(0.32 - 0.39 inch)
2 - 3mm
(0.08 - 0.12 inch)
To Next Page
Loading...
Need help?
General
