Paper Setting
43
2
Acceptable paper 2
Print quality may vary according to the type of
paper you are using.
Paper capacity of the paper
tray 2
1
Folio size is 215.9 mm x 330.2 mm.
Some important guidelines when selecting
paper are:
DO NOT use inkjet paper because it may
cause a paper jam or damage your
machine.
Preprinted paper must use ink that can
withstand the temperature of the
machine’s fusing process 200 °C.
Types of paper to avoid 2
Do not use conductive paper such as
origami paper, carbonic paper or
conductively-coated paper. When paper
jam occurs, it may cause short-circuit and
eventually a fire accident.
Some types of paper may not perform well
or may cause damage to your machine.
DO NOT use paper:
• that is highly textured
• that is extremely smooth or shiny
• that is curled or warped
1 A curl of 2 mm or greater may cause
jams to occur.
• that is coated or has a chemical finish
• that is damaged, creased or folded
• that exceeds the recommended weight
specification in this guide
• with tabs and staples
• with letterheads using low temperature
dyes or thermography
• that is multipart or carbonless
• that is designed for inkjet printing
If you use any of the types of paper listed
above, they may damage your machine.
This damage is not covered under any Fuji
Xerox warranty or service agreement.
Paper size
A4, Letter, Legal, Folio
1
,
A5, A5(Long Edge),
B5(JIS), Executive, 16K
Paper types Plain paper,
Recycled paper
No. of sheets
up to 150 (80 g/m
2
)
Paper weight
64 - 105 g/m
2
To Next Page
Loading...
Need help?
General
