Fuji Xerox DocuPrint M215 b

Using the Operator Panel Menus and Keypad 350
• Extel Hook Thresh
Purpose:
To select the external telephone hook detection threshold for the condition in which a telephone line is
not being used.
Values:
• Modem Speed
Purpose:
To specify the fax modem speed when a fax transmission or reception error occurs.
Values:
•Fax Activity
Purpose:
To set whether to automatically print a fax activity report after every 50 incoming and outgoing fax
communications.
Values:
• Fax Transmit
Purpose:
To set whether to print a transmission report after every fax transmission or only when an error occurs.
Values:
Lower Sets the external telephone hook detection threshold to Lower .
Normal * Sets the external telephone hook detection threshold to Normal .
Higher Sets the external telephone hook detection threshold to Higher .
2.4 Kbps
4.8 Kbps
9.6 Kbps
14.4 Kbps
33.6 Kbps*
Auto Print*
Automatically prints a fax activity report after every 50 incoming and
outgoing fax communications.
No Auto Print Does not automatically print a fax activity report.
Print Always Prints a transmission report after every fax transmission.
Print On Error* Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission.