Fuji Xerox DocuPrint M215 b

439 Troubleshooting
 The Printer Setting Utility
The following procedure uses Windows 7 as an example.
1 Click start → All Programs → Fuji Xerox → Fuji Xerox Printer Software for Asia-Pacific →
your printer
→ Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in
Printer Name .
The Printer Setting Utility opens.
2 Click the Printer Maintenance tab.
3 Select Non-Genuine Mode from the list at the left side of the page.
The Non-Genuine Mode page is displayed.
4 Select the check box next to On, and then click the Apply New Settings button.