369
Using the Operator Panel Menus and Keypad
• Lighten/Darken
Purpose:
To set the default copy density level.
Values:
• Delayed Start
Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once Delayed Start
mode is activated, your printer stores all of the documents to be faxed into its memory and sends them
at the specified time. After faxing in the Delayed Start mode is complete, the data in the memory is
cleared.
Values:
NOTE:
• A maximum of 19 delayed fax jobs can be stored in this printer.
Lighten2
Makes the fax lighter than the original. Works well with dark print.
Lighten1
Normal*
Works well with standard typed or printed documents.
Darken1
Makes the fax darker than the original. Works well with light print or
faint pencil markings.
Darken2
21:00*/PM9:00*
Specify the fax transmission start time when sending a fax at a
specified time.
0:00 - 23:59 / AM/PM1:00 -
12:59
To Next Page
Loading...
