97
Printer Connection and Software Installation
16
Wait a few minutes until the printer restarts to establish the wireless network.
NOTE:
• If
Found New Hardware Wizard
appears, click
Cancel
.
17
Click Print Printer Setting.
18
Confirm that "Link Quality" is shown as "Good", "Acceptable" or "Low" on the report.
NOTE:
• When "Link Quality" is "No Reception", check if the wireless settings are correctly configured. To
reconfigure the wireless settings, click
Next
on the "Configuration Complete" screen and then click
Return
.
19
Click Next.
20
Follow the on-screen instructions until the "Check Setup" screen appears.
To Next Page
Loading...
