CentreWare Internet Services
104
CentreWare Internet Services
7
EAP-Identity
Specifies the EAP identity for the first authentication.
Login Name
Specifies the login name to be used for the second authentication for EAP-Enterprise. Up to
32ASCII characters are available. The entry can be the same string as [EAP-Identity].
Password, Retype Password
Specifies the password for the login name.
USB
Enable
Select this to use the USB interface.
USB Port
Select this to enable the port.
PJL
PJL (Printer Job Language) is a job control language and a PJL command is data prepended
to the top of the print jobs. Usually select this.
Print Mode
Select the printer language to use on the machine. Selecting [Auto] enables the machine to
automatically determine and use the most
Auto Job Timeout
Configure the time that the data so far received by the machine will automatically be
printed since data is no longer sent to the printer.
Adobe Communication Protocol
Standard
Select this when the output protocol of the print driver is in the ASCII format.
Binary
Select this when the output protocol of the print driver is in the BCP format.
TBCP
Select this when the output protocol of the print driver is in the TBCP format.
RAW
Select this when the output protocol of the print driver is in the ASCII or binary format.
The data is printed without being controlled by the Adobe communication protocol.
PostScript Wait Timeout (RAW Mode)
The machine automatically terminates a connection when the machine does not receive
data for a certain period of time. When data is being printed with [RAW] selected for
[Adobe Communication Protocol], disable this if you want to use the time period set in
[Auto Job Timeout] or enable this if you want to use the timeout period of PostScript.
To Next Page
Loading...
Need help?
General
