Permissions
119
CentreWare Internet Services
7
SMB (Windows ADS)
LDAP
For details on the LDAP settings, see "LDAP" (P.110).
Logout Confirmation
Select the log-out confirmation method from the following:
Log out user immediately.
Ask user for confirmation before logging out.
Advanced Settings
Input Settings
Authentication Settings
Add Alternate Server Clicking [Add Alternate Server] adds the [Alternate Server] section
to the screen. Set [Realm] and [Server Address] for the alternate
server.
Specify Server By Select the server specification method from [Domain Name] and
[Domain Name and Host Name/IP Address].
Default Server Domain Enter the domain name of the server.
Use the NetBIOS or Active Directory
domain name for the domain name.
Server Address Specify the server address.
Add Alternate Server Clicking [Add Alternate Server] adds the [Alternate Server] section
to the screen. You can set [Domain] and [Server Address] for the
alternate server.
Case Sensitive User Name Select whether or not to ignore the case for log-in user name.
Log Failed Login Attempts Set the failure count to detect unauthorized access. An error is
logged if authentication fails the number of times specified in
[Failed Login Attempt Limit] within a predetermined time (10
minutes).
Limit Login Attempts of System
Administrator
This feature protects the settings from being changed by
someone impersonating your system administrator. If
authentication for a system administrator's ID fails more than
specified times continuously, access is denied.
You can specify a login attempt count from 1 to 10.
The failure count is reset when the machine is restarted.
To cancel the access rejection state, restart the machine by
switching off and on the power.