Error Code
201
Problem Solving
11
016-234
016-235
[Cause]
An error occurred in the Authentication feature of the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
016-242 [Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
016-244 [Cause]
Automatic update of the self-signed certificate failed.
[Remedy]
Turn the machine off and then on, and then execute the operation
again. If the error still is not resolved, contact our Customer
Support Center.
016-245 [Cause]
An accessory that is not available for the authentication and
accounting settings is attached.
[Remedy]
After changing the settings related to the accessory in the System
Administration mode, turn off the printer, remove the accessory,
and then turn on the printer.
Configure the authentication and accounting settings again, and
then restart the printer.
016-246 [Cause]
An accessory that is not available for the authentication and
accounting settings is attached.
[Remedy]
After changing the settings related to the accessory in the System
Administration mode, turn off the printer, remove the accessory,
install the correct accessory, and then turn on the printer.
016-310 [Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
016-324
016-325
016-326
016-327
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
016-330
016-331
016-332
[Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
016-335
016-336
016-337
016-338
016-339
016-340
016-341
016-342
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
016-345 [Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
Error
Code
Cause/Remedy
To Next Page
Loading...
Need help?
General
