Fuji Xerox DocuPrint P505 d User Manual

Problem Solving
216
Problem Solving
11
017-716 [Cause]
SMTP server SSL server authentication error. It is before the valid
period of the server certificate.
[Remedy]
Use the valid SSL server certificate of the SMTP server. You can
avoid this error by setting [SMTP-SSL/TLS Communication] in
[SSL/TLS Settings] to [Disabled], however the validity of the server
cannot be warranted.
017-717 [Cause]
SMTP server SSL server authentication error. The server certificate
expired.
[Remedy]
Use the valid SSL server certificate of the SMTP server. You can
avoid this error by setting [SMTP-SSL/TLS Communication] under
[SSL/TLS Settings] to [Disabled], however the validity of the server
cannot be warranted.
017-718 [Cause]
SMTP server SSL server authentication error. The server name and
certificate do not match.
[Remedy]
Use the valid SSL server certificate of the SMTP server. You can
avoid this error by setting [SMTP-SSL/TLS Communication] in
[SSL/TLS Settings] to [Disabled], however the validity of the server
cannot be warranted.
017-719 [Cause]
SMTP server SSL server authentication error. SSL authentication
internal error.
[Remedy]
Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
017-720 [Cause]
Invalid Contact Type value
[Remedy]
Correct the value of Contact Type specified in the PJL command,
and try again.
017-721 [Cause]
Invalid Geographic Region value
[Remedy]
Correct the value of Geographic Region specified in the PJL
command, and try again.
017-722 [Cause]
The PJL command failed.
[Remedy]
Try the operation when the total impressions are up to 9,999,900.
017-723 [Cause]
Character strings the DocuWorks Direct Print feature does not
support are used.
[Remedy]
Print the file from DocuWorks Viewer via the PCL print driver.
017-725 [Cause]
An error occurred while receiving a print job when the Force
Annotation is enabled.
[Remedy]
Incorrect name is set for the template of the Force Annotation.
Confirm the name of the template registered in the machine.
017-729 [Cause]
When the machine is used as a print job storage device, print job
sending was stopped temporarily because the number of jobs in
the machine exceeded the maximum receivable volume or the
space for spool data was insufficient.
[Remedy]
Take one of the following measures:

Enable Spool for IPP on CentreWare Internet Services of the
destination machine.

Wait for a while and try the same operation again.
Error
Code
Cause/Remedy

Fuji Xerox DocuPrint P505 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P505 d
Category	Printer
Language	English