Error Code
243
Problem Solving
11
"047-001" - "047-999"
"055-001" - "058-999"
"059-001" - "059-999"
Error
Code
Cause/Remedy
047-216 [Cause]
An error occurred while detecting the finisher.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
Error
Code
Cause/Remedy
058-310
058-311
[Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
058-313 [Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
058-317 [Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
Error
Code
Cause/Remedy
059-324 [Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
059-326 [Cause]
An error occurred in the machine.
[Remedy]
Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
To Next Page
Loading...
