A26361-K990-Z120-1-7619, Edition 6 25
Troubleshooting and tips
!
Refer to the safety notes in the "Safety" manual and in the "
Preparing for use" chapter
when connecting or disconnecting cables.
If a fault occurs, try to correct it as described in the following places:
● in this chapter
● in the documentation of the connected devices
● in the help systems of the software used
● in the documentation of your operating system
If you fail to correct the problem, proceed as follows:
► Switch the device off.
► Make a note of the steps and the circumstances that led to the fault.
► Make a note of any error messages displayed.
► Note the ID number of your device. The Ident-No. can be found on the type rating plate on the
back of the casing.
► Contact your sales outlet or our customer service centre.
To Next Page
Loading...
