Fujitsu AIRSTAGE UTY-DCGGZ2 - Page 37

En-37
3-4-3-2. ManualRegistration
Register the indoor unit manually.
(1) Set the item and tap the [Register] button.
No. Item Description

“Refrigerant
Address”
Inputs “Refrigerant Address” to be
registered for indoor unit.
[Initial value: 00]

“Indoor Unit
Address”
Inputs “Indoor Unit Address” to be
registered.
[Initial value: 00]
3
(Checkbox)
“Create a
new group
automatically.”
• When the checkbox is checked, the
group of only the newly added indoor
unit (R.C.G.) is created.
• When not checked, the newly added
indoor unit does not belong to the
group.
• Created group name: Group **
(** : Smallest unregistered number of
1 to 50)
(2) Registertheindoorunit.→Refer to 3-4-3-3.
3-4-3-3. Registration
Forregistration,ConrmationmodeandDeletemodeareavailable.
● Conrmationmode
(1) When R.C.G. is tapped, the indoor unit addresses belonging
to R.C.G. are displayed.
● Delete mode
(2) Thereisa[Select(Delete)]buttonontheConrmationof
Registration Indoor units screen. When [Select (Delete)]
button is tapped, [Delete] button appears and the screen
moves to the Delete mode. The registered indoor unit can be
deleted by checking the R.C.G..
When R.C.G. is tapped, the checkbox is checked and when
the [Delete] button is tapped, the checked R.C.G. can be
deleted.
For the Delete mode, even if R.C.G. button is tapped, indoor
unit address is not displayed.
Note


3