Fujitsu AOTG36LATT User Manual

- (01 - 02) -
WALL MOUNTED TYPE ASTG18-24KMCA WALL MOUNTED TYPE ASTG18-24KMCA
Energy saving control
z
Human sensor catches movements of people in a room, and operates with lower capacity when the room
is empty. When people come back to the room, it automatically returns to the previous operating mode.
10°C HEAT operation
z
The room temperature can be set to go no lower than 10 °C,
thus ensuring that the room does not get too cold when not occupied
NOTE:
When the room temperature is higher than 10 °C, “ • 10°C HEAT” operation will not start. Operation starts and maintains the room
temperature at 10 °C when the temperature drops below 10 °C.
Economy operation
z
Example : Cooling operation
Temp.
Economy operation
Shift
setting
temp
Control maximum current
Normal operation
Time
Set temperature
Low outdoor air temperature correspondence
z
Corresponds to cooling operation at -10 °C outdoor air temperature
Corresponds to heating operation at -15 °C outdoor air temperature
Cooling Heating
-10
to
46
°C
-15
to
24
°C
Demand Control
z
Restricts the operation of air-conditioner based on the demand from
energy providers in order to cut the peak load.
10
°C
20
°C
“10°C HEAT”
Button ON
Indoor unit
operation START
Economy operation is energy saving, as the set •
temperature of indoor unit is shifted by 1 °C and
the maximum electric value of the outdoor unit is
suppressed.
Energy saving operation by detecting someone’s movement
Human
sensor

Fujitsu AOTG36LATT Specifications

General

Brand	Fujitsu
Model	AOTG36LATT
Category	Air Conditioner
Language	English