Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see the operating manual for the monitor).
Device,Monitor,
► Press the O N/O FF switch on t
he front of the device.
The power indicator lights up a nd the device starts.
Switching off the device
► Shut down the operatin
g system in a defined manner. In Windows: via the
Start menu and the Tur
n Off Computer function.
Device,Monitor,
or
► Briefly press the ON /OFF switch.
► If the operating sy
stem does not automatically switch the device into energy-saving
mode or switch it of
f, press the ON/OFF switch until the device s witches off.
Warning, this cou
ld lead to a loss of data!
If the device is switched off, the device co nsumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove t he po wer plug from the power socket.
► If necessary, switch the monitor off (see the operating m anua l for the monitor).
20 Fujitsu Technology Solutions
To Next Page
Loading...
