System expan sio ns
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regula tions, you must refit the slot cover.
2
1
► Slide the slot cover into the slot (1).
► Press on the retaining clip until it you feel it eng age (2).
► For PCI b oards: Install the card holder on the front fan again (see
"
Installing the front fan", Page 48).
► Close the casing (see "
Closing the casing", Page 35).
If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the s ettings. Further
information is provided in the PCI board documentation.
Mainboard expansions
Details on how to upgrade the main memory or the processor of your device
can be found in the manual for the mainboard.
UpgradesLi thium batte ryProcessorMainmemoryMainboard
Removing and installing the rear fan
To access the rear main memory slots, you must remove the rear fan.
Fujitsu Technology Solutions 61
To Next Page
Loading...
