System expansions
Installing and removing the accessible 5
1
/
4
inch drive
Fitting the drive cover for th
e5
1
/
4
inch drive
• Requirement: The casing is open (see section "Opening the casing", Page 34).
Tousethelatchfunctionof
the accessible 5
1
/
4
inch drive, you must fit the correspo ndin g
drive cover before install
ing the drive in the casing. Proceed as follows:
2
3
1
► Unlock the drive cover (1).
► Push the driv
e m eta l plate upwards (2) so it is released from the catches with wh ich it is secured.
► Lift the drive cover away from the casing (3).
1
► Connect the
drive c over to the drive (1).
36 Fujitsu Technology Solutions
To Next Page
Loading...
