System expansions
It may be necessary to modify the entry for the drive in the BIOS Setup.
Removing a hard disk
The principles for installing/removing hard disks for the device as described below are identical
for all types of hard disk. Only the size and alignment of the hard disk in the casing may
vary (install either horizontally or vertically depending on the hard disk type).
The following images illustrate the installation of a 3
1
/
2
"drive.
Removingtheharddiskdrive
► Open the casing (see "Opening the casin g", Page 34).
► R emove the hard disk front panel (see "
Removing the hard disk front pan el", Page 53).
► R e m o v e the protective grille (see "
Removing the pro tective grille", Page 54).
1
1
2
► Press the levers of the EasyChange rails, w hich are secured to the hard disk
drive, outwards (1) until the hard disk is released.
► Pull the h
ard disk drive out of the drive cage in the direction of the arrow (2).
56 Fujitsu Technology Solutions
To Next Page
Loading...
