System expan sio ns
► Pull the EasyChange rails off the hard disk drive.
► If you no longer need the EasyChange rails, secure them again at their location in the drive cage.
It may be necessary t o modify the entry for the drive in the BIOS Setup.
Securing the pr
otective grille
1
► Put the protective grille into the sheet metal lugs on the casing and fold
it in the direction of the arrow (1).
The protective grille is secured.
► Reattach the front panel to the casing (see "
Secu ring the hard disk front panel", Page 58).
Fujitsu Technology Solutions 57
To Next Page
Loading...
