System expan sio ns
Information about boards
Take care with the locking mechanisms (catches and centring pins) when you
are replacing boards or componen ts on boards.
Note that some components on the mainboard may be very hot if the device was
in use shortly before th e casing was remo ved.
To prevent damage to the board or the components and conductors on it, please take care when
you insert or rem ove boards. Make sure expansion boards are inserte d straightly.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostat
ic sensitive devices (ESD) are identifiable by the label
shown.
When handling boards fit
ted with ESDs, you must always observe the
following points:
• You must always disc
harge sta tic build up (e.g. by touching a grounded
object) before work
ing.
• The equipment and tools y ou use must be free of static charges.
• Only touch or hold t
he boards by the edge or, if present, at the areas
marked green (Touc
h P oints).
• Never to uch pins o r conductors on boards fitted with ESDs.
Fujitsu Technology Solutions 33
To Next Page
Loading...
