System expan sio ns
Installing an accessible drive
► If you are installing th e drive in the upper bay a nd a cover (optional) is
already in place, please remove it.
or
► If you are installing the drive in the lower bay, also rem ove the meta l panel on the drive b ay.
► Fit the drive cover for the 5
1
/
4
inch drive (see "Fittin g the drive cover fo r
the 5
1
/
4
inch drive", Page 36).
Do not throw aw ay the cover. For cooling and protection a gain st fire you m us t refitthe
cover if you remove th e drive again later (see "
Removing an accessible drive", Page 38).
1
► Slide the ac
cessible drive t ogether with the attach ed drive m etal plate into
the cas ing u
ntil it eng ages (1).
► Connect the cables to the drive. Make sure the polarity is correct.
► Close the c
asing (see "
Closing the casing", Page 35).
It may be n
ecessary to modify the entry for the drive in the BIOS Setup.
Fujitsu Technology Solutions 37
To Next Page
Loading...
