Fujitsu CELSIUS M720 - Page 33

Troublesho oting and tips
Cause
Remedy
Wrong monitor has bee n s et under Window XP ► R estart the device.
► Press
F8
while the system is booting .
Either the Windows Advanced Start Options menu
or the men u for selecting th e operating system
appears.
► If the menu for selecting the operating
system appears, press
F8
.
► SelectSafe Mode or Safe Mode with Network.
► Go to Start – Settings – Control Panel – Display
and the tabs Appearance, Themes, Settings
to set the correct values for the connected
monitor as described in the operating
manual o f the monitor.
Incorrect setting fo
rthemonitorinWindowsVista
► R estart the device.
► Press
F8
while the system is booting .
Either the Windows Advanced Start Options menu
or the men u for selecting th e operating system
will appear.
► If the menu for selecting the operating
system appears, press the
F8
key.
► Select Safe Mode or Safe Mode with Network.
► Go to Start symbol – (Settings) – Control
Panel – Appearance and Personalization –
Personalization and enter the correct values
for the connected monitor as described in
the operating manual of the monitor.
Wrong monitor ha s been set under Windows 7 ► R estart the device.
► Press
F8
while the system is booting .
Either the Windows Advanced Start Options menu
or the men u for selecting th e operating system
appears.
► If the menu for selecting the operating
system appears, press
F8
.
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values for the connected monitor as
described in the operating manual of the
monitor.
Fujitsu Technology Solutions 29