System expansions
1
1
2
► Press the catches on the removable card holder in the direction of the arrow (1).
► Lift the c ard hold
er off the fan (2).
► If boards are installed at the fan, remove them (see "
Removing a board" , Page 60).
1
2
2
2
4
5
7
3
6
► Lift the lower ca tch of the fan slightly (2). At the same time, push the
fan in the direction of the arrow (3).
► To release the left-hand catch, push it in the direction of th e arrow (4).
44 Fujitsu Technology Solutions