22
FUJITSU MO Disk Formatter
1. Log on to Windows NT4.0 with administrator privileges.
2. Insert the MO disk then run the MO Disk Formatter.
The dialog box will appear.
3. Select the MCR3230SS-S (DynaMO 2300 SCSI) or
MCM3130SS-S (DynaMO 1300 SCSI) in the [Select an MO
drive] list box.
4. Select [Floppy Type (FAT16)] in the [Select a Format Type]
combo box.
5. Type an appropriate volume label in the [Volume Label] edit
box.
6. Press the [Start] button to continue formatting. Confirm the
message and click [OK] button. Formatting will start.
• All menus and messages for this software are presented in English.
• FUJITSU recommends the use of the FUJITSU MO Disk Formatter.
Use only English alphabet (A-Z) and/or numeric number (0-9)
and/or underscore (_).
To Next Page
Loading...
