23
For Mac OS 7.1 to 9.2.2 Users
1. Double click the MO Disk Formatter. The main screen will
appear.
There are 4 functions on this screen;
(1) SCSI/ATAPI Bus selection pull down
(2) SCSI/ATAPI Device list
(3) Initialize button, Option button and Mount button
(4) Function Description column
2. Insert the MO disk.
3. Select DynaMO SCSI MO disk drive on the SCSI/ATAPI
Device list.
4. Click Initialize button, Initialize screen will appear.
5. Type in the volume name for your MO disk.
If you wish to use the default parameters for your initialization,
click the [OK] button to start.
All menus and messages for this software are presented in
English.
To Next Page
Loading...
