Getting started
Getting s tarted
Gettingstarted
Please ob ser ve the safety inform a tion in the "Importa nt notes", Page 7 chapter.
Unpacking a nd checking the delivery
It is recommend ed not to throw away the original packag ing material! It may be
required for reshipment at some later date.
PackagingContentso f deliveryPackaging,
► Unpack all the individual parts.
► Check the contents of the package f
or any visible damage caused during tran sport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover t hat the deli
very does not correspond to the delivery
note, notify your local sales out
let immediately.
Steps for initial setup
Preparingf or firstuse, overviewPreparingf or use,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connecting external devices
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. How to install drives and boards is described
in the "
Syst em expansions", Page 30 chapter.
Fujitsu Technology Solutions 11
To Next Page
Loading...
