Getting started
Connecting external de vices
Read the d ocu m entation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external d e vices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cab le itself.
Connect and disconnect t he cables in the order described below.
Connecting the cables
► Turn off all power and equipment sw itches.
CordCable,
► Remove all power plugs from the grounded mains outlets.
► Connect all the cables to the device and th e external devices. Please make sure that you
always observe the safety notes provided in "
Important notes", Page 7.
► Plug all data communication cables into the appropriate sockets.
► Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. T his means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to the USB
ports", Page 16 and in the documentation for the USB devices.
Disconnecting the cables
► Switch off all affected devices
.
Cable,
► Remove all power plugs from the grounded mains outlets.
► Unplug all data communication cabl
es from the appropriate sockets.
► Disconnect all of the cables from the device and from the external devices.
Fujitsu Technology Solutions 13
To Next Page
Loading...
