System expansions
Opening the casing
Casing,D evice,
► Switch the device off. The device must not be in power-saving mode.
Please observe the safety information in "Important notes", Page 7.
Disconnect the mains plug from the mains outlet.
Only insert the power plug after you have closed the casing.
► Remove any connected wires which are in the way.
► Lay the device on its side in the man
ner shown below.
1
2
1
1
► Remove the casing screws (1).
► Slide the side cover from the casing in the direction of the arrow (2 ).
32 Fujitsu Technology Solutions
To Next Page
Loading...
